Electricity is supplied to our homes, schools, factories and stores through copper or aluminium wires from power stations. These power stations burn coal or oil, use nuclear reactions or the energy of falling water to produce energy to run the generators. The power thus generated is then transmitted to different cities and places where it is required. Electricity is then transmitted through transmission lines.
To avoid the loss of power, the output voltage from the generator is first stepped up to a high voltage by a step-up transformer. After being received at the city power station, it is again reduced to low voltage, before it reaches our homes or factories. Now question arises how is electricity conducted through wires?
We know that all substances are made up of atoms. Materials which allow the passage of electricity are called conductors. Metals, such as copper, aluminium, silver and gold are good conductors of electricity. The atoms of these metals have loosely bonded electrons. These electrons are free to move within the metal. These are called free electrons and are responsible for the conduction of current. More the number of free electrons in the metal, better it conducts the electricity.
When electric battery is connected across the ends of the metal wire, the negatively charged free electrons move away from the end connected to the negative terminals and flow toward the positive terminal. This flow of electrons is nothing but the electric current. Hence the drifting electrons cause electricity to flow. Greater the number of free electrons in a metal, easier it is for electricity to flow through it.
Some materials are poor conductors of electricity because they have less number of free electrons. Poor conductors resist the flow of electricity. The resistance of a wire depends upon its material length and area of its cross-section.
Some substances do not allow electricity to flow through them and are called insulators. These substances contain tightly-bonded electrons that cannot move away from atoms. Hence they do not conduct electricity. Glass, mica, wood, plastic and rubber are common insulators. Some substances like silicon and germanium are neither good conductors nor insulators. They are called semi-conductors.